Silva, Amilton Rodrigues daDias, Luís Eduardo Silveira2019-05-142019-05-142017SILVA, A. R. da; DIAS, L. E. S. Numerical analysis of the effect of partial interaction in the evaluation of the effective width of composite beams. Revista IBRACON de Estruturas e Materiais, v. 11, n. 4, p. 757-778, ago. 2018. Disponível em: <http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1983-41952018000400757>. Acesso em: 12 fev. 2019.1983-4195http://www.repositorio.ufop.br/handle/123456789/11296Most of the engineering problems involving structural elements of steel-concrete composite beam type are approximations of the structural problem involving concrete plates connected by connectors to steel beams. Technical standards allow the replacement of the concrete plate element by a beam element by adopting a reduction in the width of the plate element known as effective width. The effective width is obtained, in most technical norms, taking into account only the parameters of beam span length and distance between adjacent beams. Numerical and experimental works found in the literature show that this effective width depends on several other parameters, such as the width and thickness of the concrete slab, and the type of loading. The objective of this work is to verify the influence of the partial interaction in the evaluation of the effective width of composite beams formed by a concrete slab connected to a steel beam with deformable connection, being used in numerical simulation three types of finite elements: a plate element for nonlinear analysis of the concrete slab; a bar element for non-linear analysis of beams with cross-section defined by a polygon; and an interface element which connects the plate and beam elements, simulating the deformation effect of the shear connectors. In the studied examples, it was found that the reduction of the shear connection stiffness at the interface between the concrete slab and the steel beam leads to a decrease in the shear lag effect and, consequently, makes the effective width of the concrete slab closer to the its real width. In another example, curves are constructed to define the effective width of a composite beam with medium stiffness. Considering maximum stresses and maximum displacements, these curves are obtained by forcing the equivalence of the approximate model with the model closest to the real problem.en-USabertoStiffened concrete platePlaca de concreto enrijecidaArtigo publicado em periodicoThis is an open-access article distributed under the terms of the Creative Commons Attribution License. Fonte: o próprio artigohttp://dx.doi.org/10.1590/S1983-41952018000400007