DEMIN - Departamento de Engenharia de Minas
URI permanente desta comunidadehttp://www.hml.repositorio.ufop.br/handle/123456789/510
Navegar
2 resultados
Resultados da Pesquisa
Item Strategies used to control the costs of underground ventilation in some Brazilian mines.(2020) Costa, Leandro de Vilhena; Silva, José Margarida daIn an underground mine, the ventilation is responsible for 25% to 50% of its electrical energy consumption. In countries such as South Africa, United States and Canada researchers have started to achieve a significant reduction in energy consumption without neglecting aspects of the quantity and quality of air required for the best performance of the system, in compliance with safety standards and worker comfort. In Brazil, on demand this ventilation application began in 2013 at the Ipueira mine (Bahia, controlled by Ferbasa company), and was soon after applied by the Cuiabá, Córrego do Sitio I and Lamego mines; all three mines administered by Anglo Gold Ashanti. Each mine adopted frequency inverters for the main ventilation, whereby the fan rotation is adjusted according to demand and speed drivers. This measure resulted in the saving of thousands of reais, since the flow is proportional to the velocity, the pressure is proportional to the square of the velocity, and the power is proportional to the cubed velocity. Therefore, a reduction of 20% in the flow will save about 50% of the energy required. The Cuiabá mine presents the most modern and automated system in the country. The fans are controlled and monitored through a control room. In addition, sensors scattered in the mine, control the required flow rate. The Lamego mine has a similar but simpler system. This article proposes to discuss the application and improvement of the process of ventilation on demand in Brazilian mines where this system is applied.Item Nickel ore grinding energy determination.(2014) Imbelloni, Alaine Moreira; Silva, José Pedro da; Pereira, Carlos AlbertoEsse estudo descreve a aplicação de um método empírico para estimar, em laboratório, o consumo de energia de moagem primária do minério niquel com uma textura mineralogica específica. Esse método desenvolvido por Donda foi usado, anteriormente, em minério de ferro do Quadrilátero Ferrífero (Minas Gerais, Brasil), com a mesma finalidade. Através do teste de moagem, realizado com condições padronizadas e baseado no grau de liberação e na percentagem retida em 0,074 mm, é possível obter o consumo de energia de moagem. Os resultados significam uma validação do método com uma boa aproximação entre valores industriais e laboratoriais. Na prática, o consumo de energia é 26,6 kWh/t e, através do método de Donda e usando o grau de liberação como parâmetro, a energia encontrada foi de 26,8 kWh/t.