DEMEC - Departamento do Curso de Engenharia Mecânica

URI permanente desta comunidadehttp://www.hml.repositorio.ufop.br/handle/123456789/10750

Navegar

Filtros

2019 - 201912020 - 20211

Configurações

Autor: search.filters.author.Mapa, Lidianne de Paula Pinto

Resultados da Pesquisa

Agora exibindo 1 - 2 de 2
  • Nenhuma Miniatura Disponível
    Item
    Dynamic behavior of tapping axial force.
    (2021) Pereira, Igor Cezar; Mapa, Lidianne de Paula Pinto; Barros, Thamiris Nogueira de; Fortes, Reinaldo Clemente; Silva, Marcio Bacci da; Guimarães, Gustavo Paulinelli
    Background Tapping is one of the processes that most requires attention in the industry, due to the stage in which it occurs and its characteristics. In the case of tapping, it is common to use components and equipment with less rigidity, which com promises the dynamic behavior in several situations and can lead to process distortion or failure. Purpose The objective of this paper is to study the dynamic behavior of tapping in relation to several characteristics of the process. Methods The dynamic behavior of the force signal was used to evaluate the process, varying the cutting parameters and the clamping system of the workpiece. Results The experimental results indicate that the foating system did not present a good dynamic behavior at high cutting speeds, this greater application of vibration is due to the resonance due to the combination of oscillations under forced and natural vibration. Conclusions The natural frequency of the foating fxture system infuenced the behavior of the axial forces. The increase in cutting speed resulted in a direct increase in the axial force vibrations as its frequency came close to the natural frequency of the system. Through dynamic analysis of the axial force signal observed the dynamic characteristics of the process and the machine tool. This allowed the dynamic evaluation of the system through the measurement of force signals generated in the threading process.
  • Nenhuma Miniatura Disponível
    Item
    Study of the project parameters influence in the performance of solar collectors.
    (2019) Mapa, Lidianne de Paula Pinto; Mendes, Bárbara de Morais; Bortolaia, Luis Antônio; Leal, Elisângela Martins
    This paper aims to observe the influence of design parameters on the performance of plane solar collectors. From the energy balance of the plane solar collector, the mathematical model was implemented varying the following design parameters: (i) Thickness of the absorber plate; (ii) Distance between the absorber and the cover; (iii) Edge insulation thickness; (iv) Absorber emittance; (v) Conductivity of the absorber; (vi) Convective heat transfer coefficient inside the tubes; (vii) Distance between tubes; (viii) Wind velocity; (ix) Solar radiation incident; and (x) Back insulation thickness. These parameters were altered observing the influence on the optical efficiency; the coefficient of energy loss; the instantaneous efficiency; and the useful energy gain. From the results, it is possible to see that the parameters that most influence the performance of the solar collector are the distance between the absorber and the cover, the absorber emittance, the thermal conductivity of the absorber, the distance between tubes, wind speed and solar radiation incident.