EM - Escola de Minas
URI permanente desta comunidadehttp://www.hml.repositorio.ufop.br/handle/123456789/6
Notícias
A Escola de Minas de Ouro Preto foi fundada pelo cientista Claude Henri Gorceix e inaugurada em 12 de outubro de 1876.
Navegar
3 resultados
Resultados da Pesquisa
Item Sintering of manganese ore tailings under an argon atmosphere.(2016) Lima, Margarida Márcia Fernandes; Valduga, Fillipe; Lima, Rosa Malena FernandesManganese is a chemical element widely used in Metallurgy. In Brazil, the ore’s beneficiation processes discharge the tailings (fraction size 0.106mm) with considerable Mn content. It would be interesting to recover this material. The aim of this work was to obtain and characterize the sinters from the manganese ore tailings at the Morro da Mina Mine. The fines (37 μm) were calcinated at 800°C for 3600s, and afterwards, homogenized with activated charcoal (7 and 10%) and CaO (5 and 10%). The sintering were carried out at 1135, 1140 and 1145°C during 7200 and 14400s under an argon atmosphere. The sintered products were characterized by BET surface area, apparent density, X-ray diffraction, MO and SEM/EDS. The presence of potassium from the alkalis justified the low melting point of the tailings (1145°C). Due to the chemical complexity of the tailings, several phases were identified in the products: pores, silicates with a high content of manganese in the matrix, as well as other silicates with different proportions of Al, Mn, Mg and Ca, pure Fe, and SiO2, etc.Item Bench-scale calcination and sintering of a goethite iron ore sample.(2016) Silva, Mônica Suede Santos; Lima, Margarida Márcia Fernandes; Graça, Leonardo Martins; Lima, Rosa Malena FernandesThis work presents the results of bench calcination and sintering studies conducted on an iron ore sample from Iron Quadrangle, Brazil with high goethite content. The natural samples and the products of calcination and sinteringwere characterised by inductively coupled plasma optical emission spectroscopy (OES/ICP), X-ray spectrometry and gravimetric methods. Optical microscopy, X-ray diffraction (XRD) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDS) were used to identify the phases in the studied samples. Density, specific surface area, specific pore volume and pore diameter were determined through gas pycnometry. All of the natural sinter feed samples had a Fe grade N64% and a very high phosphorus grade (~0.17%). After calcination, a 3.1–3.4% increase was observed in the Fe grade compared to that of the natural sinter feed samples. The average Fe grade of the sintered samples was 59.1%. The identified phases with XRD in the raw materials were hematite and goethite. In the calcined samples, only hematite was identified because of the thermal decomposition of goethite. The density, specific surface area, specific pore volume and pore diameter of the calcined samples increased compared to those of the natural sinter feed samples. Hematite, brownmillerite, anorthite, and gehlenite were identified in the sintered samples. The sites for phosphorus occurrence were calcium silicates and apatite. The sintered samples exhibited specific surface areas lower than those of the calcined samples. This result was ascribed to the destruction of the pore structure by the sintering process.No relationship between the proportions of nucleate, intermediate and agglomerate particles used inmixture of sinter testswith the results of microtumbler was identified.Item Efeitos das características granulométricas e mineralógicas da sílica contida no itabirito compacto adicionada em um sinter feed hematítico para sinterização.(2011) Padula, Victor Pereira; Pereira, Carlos Alberto; Vieira, Cláudio Batista; Pimenta, Hamilton Porto; Vieira, Maria BeatrizA maior participação de minérios contendo uma maior quantidade de sílica de diferentes origens no beneficiamento e, por sua vez, no processo de sinterização é uma tendência natural, conseqüência da mudança no perfil do run-of-mine. No sinter, a sílica tem o papel importante de garantir um volume adequado de escória e propi¬ciar uma resistência mecânica satisfatória para as operações de manuseio, transporte e para seu uso nos altos-fornos. Nesse contexto, o objetivo desse trabalho foi carac¬terizar uma fonte de sílica (itabirito compacto) avaliando sua influência nas frações nucleantes, intermediárias e aderentes de um sinter feed hematítico anidro sobre as propriedades físicas e metalúrgicas do sínter produzido em escala-piloto, além da pro¬dutividade e do consumo de combustível na sinterização piloto.