EM - Escola de Minas
URI permanente desta comunidadehttp://www.hml.repositorio.ufop.br/handle/123456789/6
Notícias
A Escola de Minas de Ouro Preto foi fundada pelo cientista Claude Henri Gorceix e inaugurada em 12 de outubro de 1876.
Navegar
2 resultados
Resultados da Pesquisa
Item Design of sleeve connections with cross-bolted on circular hollow sections under axial tension.(2022) Amparo, Lucas Roquete; Oliveira, Matheus Miranda de; Sarmanho, Arlene Maria Cunha; Xavier, Ellen Martins; Alves, Vinicius NicchioThis present paper evaluates the behavior and resistance capacity of cross-bolted sleeve connections with circular hollow sections (CHS) under axial tension. This connection allows harmony in the continuity of the tubes. The cross-bolted sleeve connection with CHS comprises outer tubes connected by an inner tube and cross bolts at 90◦. Therefore, an experimental, numerical, and parametric study was conducted to identify the connection’s possible failure modes. The experimental tests were developed with cross bolts at 90◦, which enable the identification of fracture through the effective net area, bearing failure, and bolt bending. Finite element (FE) numerical models were developed and validated by Ansys software to provide a parametric study. Thus, such a parametric study was carried out using the verified FE models. The failure modes were evaluated considering the effects of geometric properties concerning their type and location; a relative slenderness limit for the design of connections was proposed, directing the occurrence of a failure in the outer tube. Normative prescriptions do not foresee the design of the sleeve. Therefore, new formulation methods for estimating the strength were proposed, allowing the design of these connections.Item Behavior and design formulation of steel CHS with sleeve connections.(2021) Amparo, Lucas Roquete; Oliveira, Matheus Miranda de; Sarmanho, Arlene Maria Cunha; Xavier, Ellen Martins; Alves, Vinicius NicchioStructures with tubular profiles gain space in civil construction due to their excellent response under tension, compression, and torsion. They are widely used in structural trusses, especially in large lengths. The profiles have a limited size due to the manufacturing and transport process. Therefore, there is a need to use some mechanism to perform the joint of profiles and obtain the desired length. This work aims to develop a new type of bar splice in circular hollow section (CHS) connection called sleeve connection, composed of two tubes connected with another smaller diameter tube with bolts arranged in a line (staggered bolts). This research presents an experimental, numerical, and parametric study of sleeve connection in CHS under centric axial tension. A numerical model was developed using the finite element method (FEM) considering sleeve connection with staggered bolts. From the numerical results, it was possible to analyze the connection behavior and failure modes: yielding gross cross-section, fracture through the effective net area, bolt shear failure, bearing failure of the plate, and bolt bending failure. This way, formulations were proposed to predict the sleeve connections' behavior with staggered bolts as a function of the failure modes.