EM - Escola de Minas
URI permanente desta comunidadehttp://www.hml.repositorio.ufop.br/handle/123456789/6
Notícias
A Escola de Minas de Ouro Preto foi fundada pelo cientista Claude Henri Gorceix e inaugurada em 12 de outubro de 1876.
Navegar
2 resultados
Resultados da Pesquisa
Item Plastic analysis of steel arches and framed structures with various cross sections.(2021) Silva, Jéssica Lorrany e; Deus, Lidiane Rodrigues Reis Maia de; Lemes, Igor José Mendes; Silveira, Ricardo Azoubel da MotaThis paper presents a displacement-based numerical methodology following the Euler-Bernoulli theory to simulate the 2 nonlinear behavior of steel structures. It is worth emphasizing the adoption of co-rotational finite element formulations considering large displacements and rotations and an inelastic material behavior. The numerical procedures proposed considers plasticity concentrated at the finite elements nodes, and the simulation of the steel nonlinear behavior is approached via the Strain Compatibility Method (SCM), where the material constitutive relation is used explicitly. The SCM is also applied in determining the sections bearing capacity. Moreover, the present numerical approach is not limited to a specific structural member cross-sectional typology, with the residual stress models introduced explicitly in subareas of steel cross-sections generated by a 2D discretization. Finally, results consistent with the literature and with low processing time are presented.Item Numerical analysis of RC plane structures : a concentrated nonlinear effect approach.(2018) Lemes, Igor José Mendes; Barros, Rafael Cesário; Silveira, Ricardo Azoubel da Mota; Silva, Andréa Regina Dias da; Rocha, Paulo Anderson SantanaThe present work aims to study the nonlinear behavior of reinforced concrete structures via Refined Plastic Hinge Method (RPHM). Pseudo-springs are used at the finite element ends, where the gradual loss of stiffness is determined by the combination of the normal force and bending moment (NM) in the cross section. The limiting of the uncracked, elastic and plastic regimes is done in the NM diagram. The concrete cracking is explicitly simulated with two approaches to calculate the effective moment of inertia of the cross section. The displacement-based formulation is referenced to the co-rotational system and coupled with continuation strategies to allow to overcome the possible critical points in the equilibrium paths. For validation of the numerical simulations, the results found with the proposed formulation are confronted with experimental and numerical data present in literature.