EM - Escola de Minas
URI permanente desta comunidadehttp://www.hml.repositorio.ufop.br/handle/123456789/6
Notícias
A Escola de Minas de Ouro Preto foi fundada pelo cientista Claude Henri Gorceix e inaugurada em 12 de outubro de 1876.
Navegar
2 resultados
Resultados da Pesquisa
Item Análise e comparação do torque filete a filete no rosqueamento interno por machos de corte.(2018) Vianello, Pedro Ivo Alves; Souza, R. F. A.; Silva, Marina Carla Bezerra da; Pereira, Igor CezarThe thread process is responsible for internal and external threads creation which are of large application in several areas. Even though its large usage in industry, there are few papers about this process. In this paper, it was carried out torque fillet by fillet measurements over the chamfer portion of the tap and the torque comparation between tools from two distinct manufacturers. It was used M 10 x1,5 HSSE straight flute taps, with and without coating in tapping process on a grey cast iron GG30, in order to analyse the relation between the number of fillets in the tap’s chamfer and its geometry in torque signal behaviour.Item Study of the internal thread process with cut and form taps according to secondary characteristics of the process.(2017) Pereira, Igor Cezar; Silva, Marcio Bacci daThe internal threading with tap or forming tap, is a widely applied factoring process throughout industry. However, the knowledge held by the toolmakers is not transferred to the scientific literature, which justifies the small number of studies regarding this matter. This data limitation reduces the tool and cutting condition selection guide to geometrical characteristics. This current work has twomain goals; the first one is to study the process behavior regarding the secondary and uncontrollable characteristics, such as thread length, tool coating, feed rate, and hole’s diameter. It also investigated the load distribution in the cutting edge for a tap operation. The second goal of this work is the investigation of the behavior of a new type of floating system in terms of torque and axial force. One of the outcomes of this work was that the torque distribution along the fillet was not uniform, with the torque of the third fillet higher than the others. The floating system tested reduces the axial force and torque by reducing synchronicity errors even in extremely conditions.