EM - Escola de Minas
URI permanente desta comunidadehttp://www.hml.repositorio.ufop.br/handle/123456789/6
Notícias
A Escola de Minas de Ouro Preto foi fundada pelo cientista Claude Henri Gorceix e inaugurada em 12 de outubro de 1876.
Navegar
2 resultados
Resultados da Pesquisa
Item Analysis of beam-to-upright end connections steel storage systems.(2020) Escanio, Lucas Alves; Elias, Guilherme Cássio; Neiva, Luiz Henrique de Almeida; Alves, Vinicius Nicchio; Sarmanho, Arlene Maria CunhaThis study presents an experimental and numerical research into the behavior of beam-to-upright end connections, which are part of steel storage systems. A total of 21 cantilever tests comprising three upright and four beam cross sections, were conducted, and a finite element numerical model was developed. The model was developed to compare its results with experimental results and to extrapolate these results in a parametric analysis. The aim of the study is to evaluate the behavior, semi-rigidity, and influence of the geometric parameters in the stiffness of beam–upright lipped connections of pallet-type industrial storage systems. The results of the numerical model showed good correlation with the experimental results, in terms of moment–rotation behavior and the initial stiffness values, with a maximum differenc e of 10%. In the parametric analysis, a pattern was observed in the variation of stiffness when the dimensions—mainly the height of beams—of the prototypes were increased.Item Ultimate load of steel storage systems uprights.(2018) Elias, Guilherme Cássio; Neiva, Luiz Henrique de Almeida; Sarmanho, Arlene Maria Cunha; Alves, Vinicius Nicchio; Castro, Ana Flávia Barbosa eThis study presents an experimental investigation into the behavior of steel storage rack perforated uprights under axial compression. A total of 44 prototypes comprising eleven cross-sections and four lengths were tested, and a buckling curve of the studied uprights is proposed. The focus of the study is to compare the ultimate loads of the experimental uprights by numerical and theoretical analysis, through modifications to the direct strength method (DSM) equations, using the Brazilian and European design codes. The theoretical values obtained are smaller than the experimental ones, and the interaction of distortional and global buckling is also discussed. The ultimate loads obtained with the proposed buckling curve were less conservative than the DSM equations.